Analysis of Electric Arc Furnace Lining Regeneration Process
DOI:
https://doi.org/10.47134/academicia.v1i2.10Keywords:
Lining, Electric Arc Furnace, Magnesite, Alloy, Refractory Brick, SlagAbstract
In this article, it is important to choose the inner layer of the furnace when melting steel alloy. Magnesite bricks were used as refractory materials for the lining of the basic furnace. Corroded areas of the furnace lining were restored by spraying previously used firebrick powder and pulverized slag mixture into the hot furnace lining, and the service life of the furnace lining was increased.
References
Acevedo-García, V., Rosales, E., Puga, A., Pazos, M., & ... (2020). Synthesis and use of efficient adsorbents under the principles of circular economy: Waste valorisation and electroadvanced oxidation process regeneration. Separation and …. https://www.sciencedirect.com/science/article/pii/S1383586619352499 DOI: https://doi.org/10.1016/j.seppur.2020.116796
Chen, W., Tsissios, G., Sallese, A., & ... (2021). In vivo imaging of newt lens regeneration: novel insights into the regeneration process. … Vision Science & …. https://jov.arvojournals.org/article.aspx?articleid=2776586 DOI: https://doi.org/10.1167/tvst.10.10.4
Daligaux, V. (2023). Regeneration by ozonation of catalysts coked during pyrolysis of plastics: process study and comprehension of involved phenomena. theses.hal.science. https://theses.hal.science/tel-04416857/
Genç, N., Durna, E., & Kacıra, E. (2022). The preference of the most appropriate radical-based regeneration process for spent activated carbon by the PROMETHEE approach. Environmental Science and Pollution …. https://doi.org/10.1007/s11356-021-15833-y DOI: https://doi.org/10.1007/s11356-021-15833-y
Laribi, S., Dubois, L., Weireld, G. De, & Thomas, D. (2019). Study of the post-combustion CO2 capture process by absorption-regeneration using amine solvents applied to cement plant flue gases with high CO2 contents. International Journal of …. https://www.sciencedirect.com/science/article/pii/S1750583619300660 DOI: https://doi.org/10.1016/j.ijggc.2019.102799
Lim, J., Lee, J., Moon, I., Cho, H., & ... (2021). Techno‐economic comparison of amine regeneration process with heat‐stable amine salt reclaiming units. Energy Science & …. https://doi.org/10.1002/ese3.1000 DOI: https://doi.org/10.1002/ese3.1000
Liu, X., Wang, M., Deng, L., Cheng, Y. J., & ... (2022). Direct regeneration of spent lithium iron phosphate via a low-temperature molten salt process coupled with a reductive environment. Industrial & …. https://doi.org/10.1021/acs.iecr.1c05034 DOI: https://doi.org/10.1021/acs.iecr.1c05034
Nosir, S., et al. (2022). Development of quality steel alloy liquidation technology. American Journal of Interdisciplinary Research and Development, 7(2), 74-83.
Pranowo, D., Dewanti, B. S. D., Fatimah, H., & ... (2020). Opization of regeneration process of spent bleaching earth. … Series: Earth and …. https://doi.org/10.1088/1755-1315/524/1/012011 DOI: https://doi.org/10.1088/1755-1315/524/1/012011
Rahimi, M., Diederichsen, K. M., Ozbek, N., & ... (2020). An Electrochemically Mediated Amine Regeneration Process with a Mixed Absorbent for Postcombustion CO2 Capture. Environmental …. https://doi.org/10.1021/acs.est.0c02595 DOI: https://doi.org/10.1021/acs.est.0c02595
Rey, E., Laprise, M., Lufkin, S., Rey, E., Laprise, M., & ... (2022). Key Steps of a Regeneration Process. … Regeneration in …. https://doi.org/10.1007/978-3-030-82208-8_6 DOI: https://doi.org/10.1007/978-3-030-82208-8_6
Saidmakhamadov, N. M., et al. (2023). Development of technology for liquefaction of steel alloys: development of technology for liquefaction of steel alloys.
Saidmakhamadov, N. M., et al. (2024). Research on the Effect of Oxides Formed during Steel Melting on the Quality of Castings. Best Journal of Innovation in Science, Research and Development, 3(3), 593-602.
Saidmakhamadov, N., Abdullaev, K., & Khasanov, J. (n.d.). Теория и практика современной науки. теория и практика современной науки Учредители: ООО" Институт управления и социально-экономического развития", (2), 3-8.
Saidmakhamadov, N., et al. (2022). Improvement of liquidation technology of construction steels. Техника и технологии машиностроения, 57-62.
Turakhodjaev, N., et al. (2021). Quality improvement of the steel melting technology in an electric arc furnace. ACADEMICIA: An International Multidisciplinary Research Journal, 11(7), 48-54. DOI: https://doi.org/10.5958/2249-7137.2021.01716.X
Valida, B., et al. (2022). Development of Technology of Liquefaction of Steel Alloys in Electric Furnaces. Spanish Journal of Innovation and Integrity, 8(1), 65-69.
Valida, B., et al. (2022). Explore of the Technology of Liquefaction of High–Quality Ingots from Steel Alloys. Czech Journal of Multidisciplinary Innovations, 8(1), 1-7.
Valida, B., et al. (2022). Extending the Service Life of The Electric ARC Furnace Lining. Central Asian Journal of Theoretical and Applied Science, 3(12), 153-158.
Valida, B., et al. (2022). Improvement of the Technology of Liquefaction of A500 Low–Carbon Steel Alloy in an Electric ARC Furnace. Central Asian Journal of Theoretical and Applied Science, 3(12), 159-164.
Valida, B., et al. (2022). Technology of Increasing the Service Life of Based Lining Based on Recycling. Central Asian Journal of Theoretical and Applied Science, 3(11), 43-48.
Valida, B., et al. (2024). Investigation of the Effect of Liquid Metal on the Furnace Lining During the Liquidation of Steel Alloys in an Electric ARC Furnace. American Journal of Engineering, Mechanics and Architecture, 2(1), 60-66.
Wang, M., Hariharan, S., Shaw, R. A., & Hatton, T. A. (2019). Energetics of electrochemically mediated amine regeneration process for flue gas CO2 capture. International Journal of …. https://www.sciencedirect.com/science/article/pii/S1750583618307989 DOI: https://doi.org/10.2139/ssrn.3366394
Саидмахамадов, Н. М., и др. (2023). Разработка технологии плавки стальных отливок современными методами. В Инновационные технологии в машиностроении: сборник трудов XIV Международной научно-практической конференции, 25–27 мая 2023 г., Юрга (с. 93-98). Томский политехнический университет.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 F.U. Odilov F.U. Odilov, K.Kh. Abdullaev K.Kh. Abdullaev, N.X. Tadjiev N.X. Tadjiev, V.B. Hamroev V.B. Hamroev, I.T. Tuxtaboev., M.N. Gaybullaev
This work is licensed under a Creative Commons Attribution 4.0 International License.
